| 塑料一体注塑检查井是指构成检查井的主要井座部分采用一次性注塑成型 |
| 添加时间：2021/8/27 16:48:33 浏览次数： |
| 检查井是用在建筑小区(居住区、公共建筑区、厂区等)范围内埋地塑料排水管道外径不大于800mm、埋设深度不大于6m，一般设在排水管道交汇处、转弯处、管径或坡度改变处、跌水处等，为了便于定期检查、清洁和疏通或下井操作检查用的塑料一体注塑而成或者砖砌成的井状构筑物。橡胶托辊 槽型托辊 皮带托辊 平行托辊 保定搬家 保定搬家电话 保定搬家公司 保定搬家 铜鼎 铜狮子 Inspection wells are used for buried plastic drainage pipes within the building community (residential area, public building area, plant area, etc.) with an outer diameter of no more than 800mm and a buried depth of no more than 6m. They are generally set at the intersection of drainage pipes, turns, pipe diameter or slope changes, water drops, etc. for the convenience of regular inspection Well shaped structures made of plastic or brick for cleaning and dredging or downhole operation inspection. 塑料一体注塑检查井是指构成检查井的主要井座部分采用一次性注塑成型，井筒插口采用360度环型承载平台，井身及井座底部采用网状加强筋，各承插口采用环型加强筋设计。根据接管数和角度不同有起始井座、直通井座、45度弯头井座、三通井座、四通井座等。为了适应各种排水状况，塑料检查井同时配套有变径接头、汇流接头、井筒多接头等与之配套的塑料一体注塑成型配件。以保障整个排水系统的流畅和密封性。 Plastic integrated injection molding inspection well refers to that the main well seat constituting the inspection well adopts one-time injection molding, the well socket adopts 360 degree annular bearing platform, the well body and the bottom of the well seat adopt mesh stiffeners, and each socket adopts annular stiffener design. According to the number and angle of nozzles, there are starting well seat, straight well seat, 45 degree elbow well seat, three-way well seat, four-way well seat, etc. In order to adapt to various drainage conditions, the plastic inspection well is equipped with reducing joint, confluence joint, shaft multi joint and other plastic integrated injection molding accessories. To ensure the smoothness and tightness of the whole drainage system. |
| 上一页 塑料检查井模具使用过程中注意事项 |
| 下一页 井室质量要求及控制要求 |