新闻动态
怎样满足模具的工艺性要求?
怎样满足模具的工艺性要求?
How to meet the technological requirements of moulds?
模具的制造一般都要经过锻造切削和加工以及热处理等几道工序,为保证其制造质量降低生产成本,其材料应具有良好的可锻性和切削加工性以及可磨削性等,还要具有小的氧化和脱碳敏感变形开裂倾向。
In order to ensure the manufacturing quality and reduce the production cost, the material should have good malleability, machinability and grindability, as well as small tendency of oxidation and decarbonization sensitive deformation and cracking.
那么要怎样满足工艺性能要求呢?
How to meet the requirements of process performance?
1. 可锻性具有较低的热锻变形抗力塑性好,且锻造温度范围宽锻裂冷裂和析出网状碳化物倾向低。
1. The malleability is lower than that of hot forging, and the tendency of cold cracking and precipitation of network carbide is lower in wide forging temperature range.
2. 退火工艺性球化退火温度范围宽硬度低,且波动范围小球化率高。
2. annealing process spheroidizing annealing has wide temperature range, low hardness and high fluctuation rate.
3. 切削加工性切削用量大道山刷房 保定网站建设 保定强夯 卷扬式启闭机  保定网站制作 收费岛模具 遮阳网 麻绳具损耗低且加工表面粗糙度低。
3. the cutting property of cutting props is low and the machined surface roughness is low.
4. 淬硬性淬火后又均匀而高的表面硬度。
4. hardened quenching and uniform and high surface hardness.
5. 淬透性淬火后能获得较深的淬硬层因此采用缓和的淬火介质就能淬硬。
5. after quenching, a deeper hardened layer can be obtained after quenching, so quenching can be quenched with a mild quenching medium

联系方式

  1. 名称:保定巨盛模具制造有限公司
  2. 电话:13833064090
  3. 电话:15188633222
  4. 联系人:高经理
  5. 地址:河北省保定市清苑区阎庄乡中阎庄村

版权 © 保定巨盛模具制造有限公司 网址:http://jianchajingj.75ix.cn  推荐:检查井钢模板,六棱块模具,流水槽模板,排水槽模具

塑料土工格栅 超声波换能器 保定搬家 400电话怎么办理 保定网站推广